Hard water can be the cause of several problems in your house as well as commercial space. It will make the appliances inefficient and will cause problems in the plumbing systems. To avoid such problems it is advised to use a water softener for home water or other places where you have a Hard water supply.
Here you will talk about water softener systems as also the ways to choose the best water softeners for house or office.
How Does Water Softener Work?
The water softener system is used to remove magnesium and calcium ions from the water. These ions are responsible for making the water hard. When the ions are removed, salt or sodium ions take their place. You can take a look at the NSF or National Sanitation Foundation Certified water softer with the system monitor. You would know when the salt ion in water is low and make sure that you maintain the level of soft water.
What Is The Meaning Of Grain Capacity Of Water Softener?
The maximum number of grains in the hard water is the rated capacity of the softener. The unit can remove it before the regeneration process.
How To Measure Water Hardness?
Grains per gallon or gpg is used to measure the hardness of the water. One grain of water hardness is equal to 1/7000 pound of rock. Usually the municipal water supply uses milligrams, litres or parts per million to measure the hardness in water. One gpg is equal to 17.1ppm or 17.1 mg/L. Get water softener for overhead tanks depending on the grain that should be removed daily.
How Can You Determine Water Hardness?
Two ways to determine water hardness while purchasing a water softener for home water is to buy a water test kit or call the municipality if you are using the city water supply system.
How Do The Numbers Impact The Purchase Of Water Softeners?
To know the size of water softener that would be suitable for your house, you should have multiple gallons of water that are used every day with the number of people in your house. Once you get the result, multiply it by the number of grains of hardness in the water that you use. This is how you can figure out the number of grains that should be removed from the water every day.
After this, you can look for water softeners that can easily handle the grains that make the water hard. For instance, in most households that consist of four people, a 33000 grains unit is perfect.
What Do You Mean By Regeneration?
With time, the resin bed that is installed inside the water softener has a coat of particles that causes water hardness. During this time, the softener carries out the process of regeneration also known as the regeneration cycle.
In this process, the salt that is inside the tank mixes with the water that is incoming to get rid of the hardness particles on the resin bed. After the process of regeneration, the unit is ready to turn hard water into softener water for your house or office.
What Type Of Salt Should You Use In Water Softener?
Nugget water style or clean pellet is the water softener salt that should be used in the system. The salts apart from these two are used for special applications and need only.
Does The Recharge Of Water From Softener Cause Harm To The System?
No, the water software does not recharge the water and it does not affect the septic system operation or even drain the field soil percolation.
What Is The Amount Of Water Used To Recharge?
The water that is used to recharge is equal to the water that is used to wash the laundry load.
How Much Electricity Is Used In Water Softener?
The electricity that is used by the water softener system is more or less the same as the amount that is used in digital alarm clocks.
How To Install Water Softener Systems?
Following are three things that should be kept in mind while installing a water softener in your house or office. Keep reading to know about them.
- When installing a water softener system you will require a one-inch national pipe thread taper female connection. NPT is enough to connect the tubing of your current plumbing system with the water softener. You have PVC, copper, CPVC or chlorinated polyvinyl chloride, PEX or polythene plumbing. All these plumbing types need different tools and materials for the process of installation
- For the recharge or regeneration process there should be a drain. Around ten feet of drain tubing should be supplied, but by any chance, if the drain is far from ten feet, you would have to purchase one by two-inch tubing to reach the drain. Make sure that the drain is within thirty feet of the softener. It should also be elevated eight feet it more above the floor
- You should plug the power cord into the live outlet that has a 110 voltage current. The unit usually has a ten-foot power cord with it.
These are some of the common questions that people have in their minds regarding water softeners. Get water softeners for overhead tanks from a renowned and reliable company and get amazing benefits.